Railways conducts Kavach loco trial at 160 kmph speed in Prayagraj Division; train safety to improve on Delhi-Howrah route
Kavach Railway system latest update: Kavach aids the Loco Pilot in running of trains within specified speed limits by automatic application of brakes in case Loco Pilot fails to do so and also helps the trains to run safely during inclement weather.
The Prayagraj Division comes under the administrative control of North Central Railway (NCR) zone.
Advertisement
Indian Railways Kavach system:Indian Railways is making rapid progress in implementing ‘Kavach,’ an indigenously developed Automatic Train Protection (ATP) system, across its network. Recently, the national transporter conducted Kavach locomotive trials at a speed of 160 kmph in the Prayagraj Division.
The Prayagraj Division comes under the administrative control of North Central Railway (NCR) zone. The division forms a crucial part of the Delhi-Howrah rail route.
You have exhausted your monthly limit of free stories.
Read more stories for free with an Express account.
In a statement, the North Central Railway zone said: “In a significant step towards enhancing train safety and high-speed operations on North Central Railway, KAVACH Loco Trials were successfully conducted today at a speed of 160 Kmph using a WAP-5 Light Engine for the finalization of braking parameters in the MTI–MXK section (57.23 TKM) of Prayagraj Division.”
The trials were held between Mitawali and Mandrak sub section of Tundla-Aligarh section. The trial commenced from Mitalwali Station at 12:22 hrs and concluded at 16:45 hrs, covering both UP and DN directions of the section.
Kavach Loco trial run on Delhi-Howrah route: Key objectives
The Kavach Loco trial run on Tundla-Aligarh section is aimed to validate the performance and precision of the indigenously developed Automatic Train Protection (ATP) system – KAVACH under high-speed operational conditions.
Two critical test scenarios were carried out during the trial:
Loop Line Speed Control Test
In this test, Home signals were taken ‘off’ with route indicators for the first loop line . The locomotive was run at 160 Kmph, and KAVACH automatically controlled the speed before entering the loop line— without any manual braking or pilot intervention .
In this critical safety test, Home signals were maintained at the ‘ON’ (Red) aspect . The locomotive was made to approach these signals at 160 Kmph, allowing KAVACH to automatically detect the SPAD (Signal Passed at Danger) condition and apply braking to stop the train safely— without any manual intervention.
Results :
KAVACH successfully halted the locomotive before the Home Signal in each test scenario:
Anish Mondal is a business journalist with over nine years of experience. He writes on diverse subjects such as Infrastructure, Railways, Roadways, Aviation, Politics, Market, Parliamentary affairs, Corporate earnings, General and International news etc. ... Read More