The city of Moradabad, located on the banks of the river Ramganga (a major tributary of Ganga), is famous for its brassware. This peetal nagari (brass city) of Uttar Pradesh is now the largest e-waste hub in the country, as e-waste is brought there for recovery of metals such as copper and traces of silver and gold. Risky and rudimentary ways of metal recovery from the open burning of e-waste components such as circuit boards and wires have choked the city, while panning the hazardous black ash for metals on the riverbanks has polluted the waters of Ramganga. Moradabad’s air quality index had peaked at 500 in 2017 — the highest reading in the country that year, while the Central Pollution Control Board (CPCB) found heavy metal contamination of surface water, groundwater, soil and sediments in the vicinity of the river. All this has serious repercussions for the health of the residents, besides being environmentally unsafe. There are fears that a Moradabad-like polluted e-waste hub may be in the making in Jamnagar, next to the brass industry cluster there.
Seelampur, an e-waste hub on the northeast fringe of Delhi, is the largest electronics dismantling market in India. Truckloads of electronic waste is dumped here to scrap dealers whose workers extract mostly copper from the discarded e-waste, again, unmindful of the consequences of the crude methods of recovery on health and environment. There are also other cities engaged in similar eco-disastrous resource recovery from e-waste.
[ie_backquote quote=”A study by Assocham and NEC finds that a mere 5 per cent of India’s e-waste gets recycled, much less than the global recycling rate of only 20 per cent; 95 percent of India’s e-waste is managed by the unorganised sector (kabadiwalas, scrap dealers and dismantlers) using dangerous methods to recover metals from circuit-boards and wires.” cite=”Isher Judge Ahluwalia and Almitra Patel”]
E-waste is generated when electrical or electronic equipment (EEE) is discarded, or returned within warranty, by consumers, and also from manufacturing and repair rejects. Discarded laptops, desktops, cellphones and their batteries, air conditioners and television sets, cables and wires, tubelights and CFLs which contain mercury, are some examples of e-waste.
E waste is one of the fastest growing waste streams in the world. The Global E-Waste Monitor estimates that 44.7 million tonnes (mt) of e-waste was generated in 2016. India was the fourth-largest generator (2 mt) after China (7.2 mt), the US (6.3 mt) and Japan (2.1 mt) in 2016. As Indians spend more on electronic items and appliances with rising incomes, e-waste is expected to continue to grow rapidly. While technology obsolescence creates e-waste (for example, landline phones, 2G vs 4G), power supply voltage surges which damage electronics are a major factor contributing to India’s e-waste. An additional problem arises when developed countries export their e-waste for recycling and/or disposal (legally or illegally) to developing countries, including India.
A study by ASSOCHAM and NEC finds that a mere 5 per cent of India’s e-waste gets recycled, much less than the global recycling rate of only 20 per cent; 95 percent of India’s e-waste is managed by the unorganised sector (kabadiwalas, scrap dealers and dismantlers) using dangerous methods to recover metals from circuit-boards and wires. Since electrical wires are almost invariably encased in PVC, which contains 57 per cent chlorine, the act of burning produces deadly dioxins. The smoke from such burning is known to cause cancer, damage the nervous system, and also poses several other health hazards. The National Green Tribunal has advised a ban on single-use PVC and short-life PVC products but not on wires and cables. The workers themselves ignore safety measures needed for their work.
Kabadiwalas have been our age-old recyclers, efficiently channelising used metals, paper and plastic to a new life. But PVC wires and cables and circuit boards require strict monitoring and deterrence along with safe alternatives for recycling. Wire stripping units can be set up at the points of aggregation and burning, funded by wire and cable manufacturers. Similarly, producers can offer attractive buyback prices for circuit boards and channelise their recycling to the formal sector.
Not all e-waste is hazardous to manage when dismantling or recycling is carried out by the informal sector. It is usually a minuscule proportion of the total but has disastrous consequences for the environment and public health and for their own health if not carried out with due precaution. For example, only the metal recovery process from a 40 gm circuit board in a discarded clothes washing machine weighing 100 kg poses a challenge. The major portion of the discarded machine goes into the usual recycling streams, such as aluminium, iron, plastic and glass.
India enjoys a frugal hand-me-down culture with a long line of re-users from a younger sibling to a maid to her village. As a result, our e-waste takes a lot longer to reach end of life. What can we do with our end of life products? Cities should organise quarterly collection drives or provide drop -off centres. Producers should set up collection centres for EEE. Ideally, we should all purchase new products turning in our old ones for a discount, so that dealers become aggregators for channelising e-items to authorised dismantlers. Meanwhile, we as users can reduce e-waste by buying long-life items, and supporting repair and refurbishment. Producer responsibility organisations like Reverse Logistics Group and Karo Sambhav are paid by EEE producers to source and pay for e-waste. They should be encouraged to network with kabadiwalas. California’s Electronic Waste Recycling Act achieves this through an E-waste Recycling Fee on purchases of EEE. That helps reimburse numerous recycling centres offering free services to businesses and consumers.
Management of e-waste requires its dismantling, refurbishment or recycling and safe disposal The E Waste Management Rules 2016 address these issues. Extended producer responsibility is mandated to ensure effective plans for collection, setting up collection centres and buy back mechanisms or a deposit refund scheme. But the Rules need to be backed by enforcement of the regulatory framework, provision of the necessary infrastructure, and an enabling environment for compliance.
There are close to 200 e-waste recyclers in India which are licensed by the CPCB, but most of them are also just dismantlers. Formal sector recyclers face stiff competition from informal operators who get away without following the regulations. Authorised recyclers incur large overhead costs for mandatory infrastructure for construction and equipment and the official and unofficial costs of compliance with multiple regulations.
Currently the only safe way to recycle circuit boards, for example, is to shred them for export to a handful of large companies worldwide which add them to copper-ore in smelting furnaces. The precious metals that come out with the copper are then separated by sophisticated chemistry. Annual export permits for circuit-boards have been routinely granted since 2007. But for the past one year, there has been a logjam in the issue of these permits by the MoEF. The consequential cost of inventory build-up encourages malpractice and leakage of the e-waste to the informal sector because material-flow monitoring of the authorised recyclers is weak. A promising R&D effort at safe metal recovery and separation within India is unable to take off for want of long-pending consent/approval from a state pollution control board for furnacing trials. A rapidly growing e-waste crisis needs rapid official decision making and time-bound responses.
📣 The Indian Express is now on Telegram. Click here to join our channel (@indianexpress) and stay updated with the latest headlines
- The Indian Express website has been rated GREEN for its credibility and trustworthiness by Newsguard, a global service that rates news sources for their journalistic standards.